| Towing capacity (in kg) |
1306 |
| Vertical load (in kg) |
75 |
| Removable |
SANS OUTILS |
| Bumper cut's |
NOT VISIBLE |
| Bumper removal |
- |
| Compatibility |
Ford FIESTA |
| Restriction |
Titanium |
VERTICAL DETACHABLE TOWBAR + 7 PIN UNIVERSAL MULTIPLEX WIRING KIT
UMBRA RIMORCHI has been an Italian hitch manufacturer since 1976 and is the first company in the hitch sector to be certified by the ISO-9001 standard. Today the brand has an international reach and is exported to more than 40 countries worldwide.
The UMBRA RIMORCHI Vertical Dismountable Hitch (RDSOV) is a top of the range hitch. The ball joint is designed to be fixed vertically under the bumper, so you preserve the design of your vehicle. Indeed, the coupling support where the ball fits (sleeve) is completely invisible once the ball is removed.
Furthermore, the ball joint is easily removed without the use of tools and in complete safety thanks to its key locking system. After towing your trailer, caravan or bike carrier, you can remove your ball joint and store it in its bag.
RDSOV installation:
7-PIN BEAM+ ELECTRONIC BOX FOR MULTIPLEX VEHICLE
The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.
The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.
You also have a picture of the assembly instructions. The approximate time to assemble a wiring kit is about 15-30 minutes.
BEAM CHARACTERISTICS
|
Number of pins |
7 |
|
Reprogramming |
No |
|
Compatibility Bulb |
Alltypes : traditional, LED, à dual intensity |
|
Output protections |
- outputs protected against short circuits
-Reverse polarity protection
-IP50 Protection |
|
Pre-mounted terminal on the box |
Yes |
|
Warranty |
2 years |
-
The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
-
In addition, the wiring kit does not affect the operation of the reversing radars.
-
The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).
BENEFITS AND SECURITY
RDSOV vertically removable towbar :
-
Easy to use, with fast, precise assembly, ideal for permanent use
-
The equivalent of the original towbar
-
The ball joint can be removed without tools, and is easy to lock and unlock
-
Completely invisible when not in use
-
Retractable beam support
-
Designed specifically for your vehicle
-
Cathodic dip varnishing to prevent oxidation of your towbar
-
Preserves your vehicle's appearance thanks to the ball-and-socket joint that fits under the bumper
-
The key lock ensures the safety of your ball joint and prevents theft.
Wiring Kit
-
Allows you to supply electricity to the lights of your trailer and bike carrier
-
No reprogramming required
-
Fits all multiplexed vehicles
-
Comes pre-wired with 2400mm sheathed wires, allowing the module to be mounted on either side
-
Power wire (more permanent) is 5.5m long
-
Pre-mounted terminal on the trailer socket earth
UMBRA RIMORCHI hitches comply with all the European standards in force, if you want to know more about les
the certifications, strandards and guarantees of UMBRA RIMORCHI hitches click here
CONTENTS OF THE PACK
-
Hitching instructions
-
Bolts and nuts
-
Ball joint cover
-
Retractable beam support
-
Keys for anti-theft system
-
Ball joint RDSOV Fitting
-
7-pin wiring harness + V7 relay box + Fixing + Assembly instructions
03 20 09 37 82
