ADD TO CART

Towbar BMW SERIE 3 BREAK Type E91 from 09/2005 to 08/2012 : Swan neck towbar incl. 7 pin universal multiplex wiring kit IMIOLA 

  1. BMW
  2. SERIE 3 BREAK
  3. From 09/2005 to 08/2012

BMW SERIE 3 BREAK

Swan neck towbar incl. 7 pin universal multiplex wiring kit

Swan neck towbar incl. 7 pin universal multiplex wiring kit

179
Ref : B/010_UNIKIT1L
-+
Towing capacity (in kg) 1900
Vertical load (in kg) 75
Removable AVEC OUTILS
Bumper cut's YES
Bumper removal -
Compatibility BMW SERIE 3 BREAK
Restriction Aucune (compatible avec toutes les versions)

Swan neck towbar Imiola

The IMIOLA swan neck towbar is the ideal solution for frequent use.

Designed specifically for your vehicle, the swan neck towbar allows you to tow any type of trailer, bike carrier, boat carrier, caravan, etc. The swan neck towbar is more aesthetically pleasing than the angled towbar, and with this towbar it is also possible to remove your towbar after use (using a simple English key).

Crochet attelage

In addition to strictly respecting the alignment and centre distances of the holes on the chassis of your vehicle, this towbar is protected against all external aggressions, and in particular climatic ones, by a cathodic immersion varnish (KTL), which prevents the oxidation of the towbar and consequently the chassis of your vehicle.
All towbars are tested and approved in accordance with Directive 94/20 EC and 55 CER.
The assembly is made easy for you thanks to the assembly manual specific to your vehicle with pictorial descriptions. 

IMIOLA


7-PIN + ELECTRONIC BOX FOR MULTIPLEX VEHICLE


The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.

The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.

You also have a picture of the assembly instructions. The approximate time to assemble a wiring kit is about 15-30 minutes.

WIRING KIT CHARACTERISTICS

 
Number of pins  7
Reprogramming No
Compatibility Bulb Alltypes : traditional, LED, à dual intensity 
Output protections - outputs protected against short circuits
-Reverse polarity protection
-IP50 Protection
Pre-mounted terminal on the box Yes
Warranty 2 years

  • The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
  • In addition, the wiring kit does not affect the operation of the reversing radars.
  • The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).
 

BENEFITS AND SECURITY

Swan neck towbar 

  • The IMIOLA swan neck towbar has a lifetime guarantee
  • Vehicle specific towbar
  • Ideal for towing your trailer, bike carrier or caravan
  • Your swan neck towbar can be easily removed by unscrewing the HM16 screws
  • The swan neck towbar has the best value for money for your daily towing needs
  • 100% European manufacture
  • complies with the European standard 94/20
  • The ball joint is securely fixed to the towbar with 2 large HM16 screws
  • IMIOLA guarantees its towbars for a period of 3 years
  • Products tested by the PIMOT laboratory (Institute of Automotive Industry)
  • It's towbars are designed and tested according to the E20 standard 
  • Allows you to tow a maximum load with your towbar

Wiring Kit

  • Allows you to supply electricity to the lights of your trailer and bike carrier
  • No reprogramming required
  • Fits all multiplexed vehicles
  • Comes pre-wired with 2400mm sheathed wires, allowing the module to be mounted on either side
  • Power wire (more permanent) is 5.5m long
 
TUV certification : ISO 9001:2008 system certificate

IMIOLA towbars comply with all applicable European standards, if you want to know more about IMIOLA towbar certifications, standards and guarantees click here

CONTENT OF THE PACK

 
  • Robust steel fittings
  • Bolts and nuts
  • Ball joint cover
  • Wiring kit holder
  • Swan neck towbar ball joint
  • Assembly instructions
  • 7-pin wiring kit + V7 relay box + Fixing + Assembly instructions

 

Customers who bought this article were also interested in :

 

EXPERTS AT YOUR SERVICE SINCE 2013

Paiement sécurisé Visa - CARPRATIK Paiement sécurisé MasterCard - CARPRATIK Paiement sécurisé CB 3x Société générale - CARPRATIK
In the same theme : bike carrier at low prices - bike carrier towbar attachment - trailer hitch - towbar - Combination Pintle Hook - specific wiring kit - universal wiring kit - swan neck towbar - detachable towball