Towbar Mercedes CLASSE A Type W169 from 09/2004 to 09/2012 : Vertical detachable Towbar incl. 7 pin universal multiplex wiring kit IMIOLA 

VERTICAL DETACHABLE TOWBAR

The Vertical detachable towbar from IMIOLA is a top-of-the-line towbar combining practicality, safety and aesthetics. Totally invisible, you just have to insert the ball joint from the bottom (vertically) in the intake tube (sleeve). Equipped with an anti-theft device, the operation is based on a system composed of three balls that firmly hold the ball joint, thus avoiding any play or wear. It ensures absolute safety, easy handling and great comfort of use.

In addition to scrupulously respecting the alignments and center distances of the holes on the chassis of your vehicle, this towbar is protected against all external aggressions, and in particular climatic, by a cathodic immersion varnishing (KTL), which avoids the oxidation of the fitting and the vehicle. Benefit from maximum safety and ease of assembly with the IMIOLA Vertical detachable Towbar. In effect, these towbars are all approved according to the 94/20 CE directive and have the TUV 9001:2008 certification.

IMIOLA :

7 PIN WIRING KIT + ELECTRONIC BOX FOR MULTIPLEX

The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.

The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.

You also have a picture of the assembly instructions.The approximate time to assemble a wiring kit is about 15-30 minutes.

WIRING KIT CHARACTERISTICS

Number of pins	7
Reprogramming	Nein
Compatibility Bulb	Alltypes : traditional, LED, à dual intensity
Output protections	- outputs protected against short circuits -Reverse polarity protection -IP50 Protection
Pre-mounted terminal on the box	Yes
Warranty	2 years

• The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
• In addition, the wiring kit does not affect the operation of the reversing radars.
• The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).

BENEFITS AND SECURITY

• Easy to use, the ball joint is characterised by a quick assembly/disassembly.
• No tools are required to attach the ball joint
• The sleeve is vertical, which makes it completely invisible when you remove the ball joint.
• Retractable wiring support, this one comes to be placed behind the bumper after use.
• Designed specifically for your vehicle
• Cathodic immersion varnishing to avoid oxidation of your towbar
• Aesthetics of the vehicle preserved thanks to the ball joint that fits behind the bumper
• IMIOLA guarantees its Towbars for a period of 3 years
• Products submitted to tests by the PIMOT laboratory (Institute of Automotive Industry)
• Its towbars are designed and tested according to the E20 standard
• Allows you to tow a maximum load with your towbar
• Towbar approved according to the European standard EC94/20 with fixing on the anchorage points provided

Wiring Kit

• Allows you to supply electricity to the lights of your trailer and bike carrier
• No reprogramming required
• Fits all multiplexed vehicles
• Comes pre-wired with 2400mm sheathed wires, allowing the module to be mounted on either side
• Power wire (more permanent) is 5.5m long

TUV certification : ISO 9001:2008 system certificate

IMIOLA towbars comply with all applicable European standards, if you want to know more about IMIOLA towbar certifications, standards and guarantees click here

CONTENT OF THE PACK

• Towbar instruction 
• Bolts and nuts
• Ball joint cover
• Retractable beam support
• Keys for anti-theft system
• RDSOV ball joint
• Fitting
• 7-pin wiring harness + V7 relay box + Fixing + Assembly instructions

ACCESSORIES