| Towing capacity (in kg) |
1300 |
| Vertical load (in kg) |
50 |
| Removable |
SANS OUTILS |
| Bumper cut's |
NOT VISIBLE |
| Bumper removal |
- |
HORIZONTAL DETACHABLE TOWBAR GDW
BOISNIER GDW, a manufacturer specialising in towbars since 1965, has put all its expertise into the design of this horizontal detachable towbar.
The horizontal detachable Towbar is ergonomic and economical. The ball joint is designed to be fixed horizontally and can be removed very easily.
No tools are required to remove your towbar, it can be attached and removed using the handle provided. After towing your trailer, caravan or bike carrier, you can remove the ball joint and store it in its bag.
Presentation of GDW :
7-PIN BEAM+ ELECTRONIC BOX FOR MULTIPLEX VEHICLE
The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.
The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.
You also have a picture of the assembly instructions. The approximate time to assemble a wiring kit is about 15-30 minutes.
WIRING KIT CHARACTERISTICS
|
Number of pins |
7 |
|
Reprogramming |
No |
|
Compatibility Bulb |
Alltypes : traditional, LED, à dual intensity |
|
Output protections |
- outputs protected against short circuits
-Reverse polarity protection
-IP50 Protection |
|
Pre-mounted terminal on the box |
Yes |
|
Warranty |
2 years |
-
The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
-
In addition, the wiring kit does not affect the operation of the reversing radars.
-
The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).
BENEFITS AND SECURITY
Removable ball hitch :
-
Easy to use, the ball joint is characterised by quick assembly/disassembly.
-
No tools are required to attach the ball joint.
-
Retractable wiring kit support, which can be stored behind the bumper after use.
-
Designed specifically for your vehicle
-
Cathodic dip coating to prevent oxidation of your towbar
-
Preserves the aesthetics of the vehicle thanks to the ball joint that fits behind the bumper
-
Approved to European standard EC94/20 with attachment to the designated anchor points
-
The ball joint is securely fixed to the towbar with 2 large HM16 screws
-
BOISNIER GDW guarantees its Trowbars for a period of 3 years
-
Certified ISO 3853/ISO 1176/ISO 1103
-
Allows you to tow a maximum load with your trailer hitch
Wiring Kit
-
Allows you to supply electricity to the lights of your trailer and bike carrier
-
No reprogramming required
-
Fits all multiplexed vehicles
-
Comes pre-wired with 2400mm sheathed wires, allowing the module to be mounted on either side
-
Power wire (more permanent) is 5.5m long
-
Pre-mounted terminal on the trailer socket earth
GDW hitches comply with all the European standards in force, if you want to know more about les
the certifications, strandards and guarantees of GDW hitches click here
CONTENT OF THE PACK
-
Towbar instructions
-
Bolts and nuts
-
Ball joint cover
-
Retractable wiring kit support
-
Horizontal detachable trowbar ball joint
-
Fitting
-
7-pin wiring kit + V7 relay box + Fixing + Assembly instructions
03 20 09 37 82
